What is the proper ride height for the vehicle?
Ride height will vary with each model. Contact our technical support department for the appropriate frame width on your particular unit. Ride height measurement is taken positioned from the bottom of the mainframe rail to the top of the H-frame. Ride height valve is positioned at the center of the bore. Adjustment is made at the arm located immediately before the valve body. Caution must be taken to prevent cutting the rod and causing the shortened rod to pull out of the rubber boot. Check the ride height linkage for obstruction, loose hose, wire loom, airline, anything that may have loosened to rub against the valve. These components should be wire tied safely away from the ride height valve to allow free movement of the valve. The ride height must be measured on level ground with full air suspension.
