What is the proper method for applying ReflecTech® Mirror Film to a substrate?
The roll lamination method described in our Application Bulletin is the proper method for applying ReflecTech® Mirror Film. To avoid air bubbles, you must start with a clean, flat substrate with no scratches, pitting, etc. Any pitting or scratches will appear as bubbles or raised profile. Wipe the sheet with a solvent such as isopropyl alcohol to remove any residue. Use a tack cloth just before laminating. Most important, lightly apply a tack cloth over the sheet immediately before the sheet enters the nip of the roller. This last step is most effective in avoiding bubbles. Any bubbles that form using this method are typically from pits or scratches in the substrate. How does ReflecTech® Mirror Film stand up to hail?
The roll lamination method described in the User’s Guide (www.ReflecTechSolar.com/Product.html) is the proper method for applying ReflecTech® Mirror Film. To avoid air bubbles, you must start with a clean, flat substrate with no scratches, pitting, etc. Any pitting or scratches will appear as bubbles or raised profile. Wipe the sheet with a solvent such as isopropyl alcohol to remove any residue. Use a tack cloth just before laminating. Most important, lightly apply a tack cloth over the sheet immediately before the sheet enters the nip of the roller. This last step is most effective in avoiding bubbles. Any bubbles that form using this method are typically from pits or scratches in the substrate.
