What is the process for heat seal laminating?
a. Place the insert in the pouch b. Place the pouch in a carrier (a standard business envelope or folded paper will suffice); the carrier captures excess adhesive which might be squeezed out during laminating. Without the carrier, excess adhesive will accumulate on the laminator rollers, which will eventually require dismantling the laminator to clean the rollers. c. Feed the carrier through the laminator. Allow the laminator to get to temperature before laminating — see the chart below for the optimum temperature. When in doubt, start with a low temperature and slowly increase the temperature until the pouch adhesive is clear after laminating.
