Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

What is the procedure to install single hung & double hung vinyl windows?

April 26, 2017double hung install procedure vinyl Windows

0

Posted

What is the procedure to install single hung & double hung vinyl windows?

1 Answer

0

Posted

PROTECT YOUR GUARANTEE READ AND FOLLOW THE INSTRUCTIONS BELOW IMPORTANT • Before installation, be sure window is closed and locked. • For new construction, caulk area where either the nailing flange or window jamb meets the exterior finish material. • For proper operation and performance, it is important that there be clearance of approximately 3/8″ on sides and 1/2″ on top between the window and the rough stud opening. • Window must be installed- (A) Plumb (B) Level (C) Square (D) Shimmed • Secure window in opening by fastening nailing flange and by using 2 1/2″ wood screws through side jamb into stud at top and bottom shimmed locations. • Install insulation between jamb and framing. Use only enough insulation to loosely fill the opening. Packing too much insulation may distort the frame member. • For smooth performance of the operating sash, apply silicone spray to the side tracks.