Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

What is the location for the registration marks on the ETX, GTX, ITX 2000 & ITX 3000 Ticket Printers?

April 26, 2017etx gtx location marks printers registration

0

Posted

What is the location for the registration marks on the ETX, GTX, ITX 2000 & ITX 3000 Ticket Printers?

1 Answer

0

Posted

REGISTRATION MARK LOCATION: ETX 2000, GTX 2000, ITX 2000, ITX 3000 PRINTERS NOTE: The registration mark sensors on the ETX2000, GTX2000 and ITX2000/3000 ticket printers are located below and to the left side of the ticket when looking at the printer. The distance from the cut line to the cut position sensor is factory set to 6.7″. The following formula must be used to determine the location of the registration mark relative to the leading edge of the ticket. Refer to the drawing below for dimensions. DCRM = 6.7″ – (TL x m) where: DCRM = the distance from the cut line to the leading edge of the registration mark TL = the ticket length in inches 6.7″ = the physical distance from the cut line to the cut position sensor on the printer m = 6.7″ / TL (multiple of tickets within 6.7″; integer value) Examples: TL = 2.0″ m = 6.7″ / 2.0 = 3 DCRM = 6.7″ – (2.0″ x 3) = 0.7″ TL = 5.5″ m = 6.7″ / 5.5 = 1 DCRM = 6.7″ – (5.5″ x 1) = 1.2″ Common ticket lengths with resulting DCRM’s 2.0″0.7″ 2.5″1.7″ 3.