What is the correct way to fit a tire?
– All spoke holes must be completely and securely covered with an appropriate rim tape. – Observe any rolling direction markings on the tire sidewall. – Never use sharp fitting tools. – Pull one tire side onto the rim (fig.1) – Slightly inflate the tube until it is round. – Fit the valve through the valve hole in the rim. – Place the tube into the tire. (Fig. 2) – Starting at the opposite side to the valve fit the other tire side onto the rim. – Ensure the tube is not pinched between the rim and the tire. – The valve should be in an upright position. – Center the tire before inflating it to the required pressure. – Adjust the inflation pressure using a pressure gauge, e.g. the AIRMAX pressure gauge. The permissible pressure range is marked on the tire sidewalls. The higher the inflation pressure, the lower the rolling resistance, the tire wear and the less likelihood of a puncture. – The inflation pressure should be checked at least once a month.
