What is the correct sequence for installing the Starter Kit on OSR 2.1?
The order in which components were installed is very important. The correct order for OSR2.1 is: 1.Install USB supplement 2.Plug in thermometer 3.Install device driver 4.Install and run thermometer application. If your system seems to be in an inconsistent state, uninstall the USB supplement and the thermometer application (use Add/Remove Program from the Control Panel). Now, reinstall just the supplement. At this point you shouldhave 2 subentries under the Device Manager’s USB Controller heading: -Host Controller -Root Hub If you don’t find these two entries your system has not detect your PC’s USB hardware. Try rebooting your PC pressing the refresh button in the device manager. Plug in the thermometer. The following things should occur in the order specified: 1. The red LED turns on. 2. The mouse pointer should turn into an hourglass and the Add New Hardware Wizard appears on the screen prompting you to look for a device driver. Load the device driver (from CD). 3. The green LED tur
