What is the constraint of using Telnet and Hyper-Terminal for monitoring and control of IG3010?
The InfoGate 3010 must be preconfigured to a LAN, by setting a Machine Name, Local IP address, IP mask using a Hyper-terminal window before the InfoGate 3010 can be accessed through a Telnet window. This is accomplished using the ‘Ci’ command. An InfoGate 3010 can be accessed either through a Telenet window or a Hyper-terminal window (or several other serial communication programs like ProComm). However, only one authorized ‘Administrator’ (with the right Username and Password) may access any InfoGate 3010 at a time through a Telnet or Hyper-terminal session. Furthermore, if a Telnet session is established and another person tries to use the Hyper-terminal to access the IG3010, the following message will be displayed:”Can not access control due to existing TELNET user.
Related Questions
- Are industrial users (IUs) required to submit monitoring data to the POTW/control authority if samples are collected in addition to samples required by the PFPR regulation?
- What is the constraint of using Telnet and Hyper-Terminal for monitoring and control of IG3010?
- What types of remote monitoring and control are possible?
