What is the best way to apply the Stone Sealer products?
The best way to apply all of the above natural stone sealants is to put the sealer on to a white terry towel cloth and then rub it onto the stone surface. Allow the sealer to impregnate the stone for 5-10 minutes and then remove the excess from the stone surface (this is the most important step because if the sealer dries on the surface it will leave a residue). Allow to dry for 2 hours. Re-apply using the same procedure and then remove the excess. The polymer in the sealant will cure in approximately 24 hours at 60 deg F. After curing place a small droplet of water on the marble, granite, slate or limestone surface to check that it beads up and this will indicate that the sealant has satisfactorily cured.
