What is the best method to fix Avongard Tell-Tales?
Ideally the Tell-Tales should be fixed with screws / rawlplugs and adhesive. There is the risk of tampering if fixed with screws alone. On some surfaces there is no option but to use only adhesive. The adhesive must fully cure before the four plugs are removed (Plus Tell-Tale) or the tape is cut (Standard). The time taken for the adhesive to cure will depend on the ambient temperature, but the Tell-Tale must be held in position until the adhesive has hardened sufficiently for it to support the weight of the Tell-Tale. Some customers use the following technique to provide temporary support of the Tell-Tale until the adhesive cures. • Roll a piece of Blu Tack into a ball and squeeze it flat until it is about the size of a coin. • Press it on to the back of the Tell-Tale on the white coated section. • Apply the adhesive at both ends of the Tell-Tale and press it into position across the crack. • Do not remove the four plugs (Plus Tell-Tale) or the tape is cut (Standard) until the adhesive
