What is the benefit of being able to see inside of the analyzer while heating?
• Being able to see inside of the analyzer gives users a sense of safety. Not only water in a sample that can be overheated or is burnable may be vaporized but also other material can be carbonized or decomposed. It is very important for users to check by looking at the sample through Progress Window to evaluate the data. Back to top • What is the minimum measurement time? • It depends on material and moisture content but because MX/MF incorporates 400W halogen lamp as heating source the pan can be heated from ambient temperature to 200C in only 2 minutes. Also, since a SHSTM sensor designed for analytical balances is installed sensing weight of sample before and after heating is precise and thus, requires less sample volume than before. With appropriate heating temperature and sample mass, measurement can generally be done within a few minutes to 20 minutes. Therefore, for the following reasons MX/MF’s heating time and thus, measurement time are shortened. • Heating to a set temperatu
Being able to see inside the analyzer gives users a sense of safety. It is not only water in a sample that can be overheated or is burnable and may be vaporized, but also other materials can be carbonized or decomposed. It is very important for users to check by looking at the sample through Progress Window to evaluate the data.
Being able to see inside of the analyzer gives users a sense of safety. Not only water in a sample that can be overheated or is burnable may be vaporized but also other material can be carbonized or decomposed. It is very important for users to check by looking at the sample through Progress Window to evaluate the data.
