What is the behavior of the tamper tag?
The tag is shipped in sleep mode (no beaconing). When the tag is attached to an asset and the tamper switch is depressed for more than 10 seconds, the tag will wake up and the tamper switch becomes “armed”. The tag behaves as a 10-second beacon tag (payload P760). If the tag is removed from the asset, the tamper switch is released (disengaged) and the tag emits a Tamper Alert: P770 eight times at ~0.5 second intervals. Then the tag continues to emit the P770 tamper payload at a 2-second interval. The tag can be physically reset after 1 hour by depressing the tamper switch for more than 10 seconds.
