What is the basic setup for the Quintet™ III and optional SUB 10 or 12 subwoofer?
For most home theater systems, you’ll use a standard RCA connector hookup. This is a shielded wire that is similar in construction to the wires leading from a DVD player to a receiver. It will connect to the single SUB or LFE jack on the back of your receiver and to either of the two inputs on the back of the sub. If you wish, you may obtain a ‘Y’ connector to hook up to both of the sub inputs; this will result in a slight increase in volume. Cables specifically designed for subwoofer use typically are better shielded than standard ‘patch cables’ and may offer possible noise reduction or cancellation from electrical devices the cable may come in contact with. Some subwoofer cables are directional, (one end always hooks up to receiver, the other to the sub), so always read any instructions that come with your specialty cabling. Settings in the receiver’s menu system are detailed in the owner’s manual. Here are some suggestions for getting the best possible sound and reliability from you
