What is AMI Quickflash and how do I use it?
AMI quickflash is the same as the AMI BIOS recovery method. Basically, it’s a method to flash the BIOS without a flash utility. Follow these instructions: – Copy the “ROM” file to a diskette in “A” drive.(Diskette does not have to be bootable). – Make sure you are using the on board floppy controller. – With system powered off and diskette with “ROM” file in “A” drive. – Hold down on the “CTRL & HOME” keys and then power on system. – There will be no video and notice floppy drive being accessed. – You should hear 1 beep let go of keys. – Then you will hear 2 beeps and then 3 beeps. – System should reset and notice new BIOS release date at top of screen. – Enter BIOS SETUP run the OPTIMAL SETINGS OPTION. – Change BIOS SETTINGS for your configuration.
