What Is a Sump System?
A sump pump system consists of four major parts: a ground-water collection system, a sump tank, a pump and an outlet drain. Here’s how they work: Ground water is collected by drain rock and drain tile buried along the foundation (and, in some cases, under the floor). Drain tile carries the water to the sump tank (or two sump tanks, in a large house) that is buried in the basement floor. The sump tank, also called a “basin,” “crock,” or “sump pit,” may be made of clay, tile, steel, concrete, fiberglass or polyethylene. Though they vary in size, standard tanks are about 18 inches in diameter and from 2 to 3 feet deep. Normally, a tank is located at the low point of the basement. Most tanks have a hole in each side for incoming drain tile and all have a sturdy cover. When ground water fills the tank to a given level, a float or some other switching device activates a pump. (Though much less common, some pumps are controlled manually.) Many pump manufacturers sell polypropylene or fibergla
A sump pump system consists of four major parts: a groundwater collection system, a sump tank, a pump, and an outlet drain. Here’s how they work: GA_googleFillSlot(“HT_BasementAtticLoft_Sump_Pumps_Moisture_Articles_Box_Top_Left_ATF_300x250”); Groundwater is collected by drain rock and drain tile buried along the foundation (and, in some cases, under the floor). Drain tile carries the water to the sump tank (or two sump tanks, in a large house) that is buried in the basement floor. The sump tank, also called a “basin,” “crock,” or “sump pit,” may be made of clay, tile, steel, concrete, fiberglass, or polyethylene. Though they vary in size, standard tanks are about 18 inches in diameter and from 2 to 3 feet deep. Normally, a sump tank is located at the lowest point in the basement. Most tanks have a hole in each side for incoming drain tile and all have a sturdy cover. When groundwater fills the tank to a given level, a float or some other type of switching device activates a pump. (Thou
A sump pump system consists of four major parts: a ground water collection system, a sump tank, a pump, and an outlet drain. Here’s how they work: GA_googleFillSlot(“HT_BasementAtticLoft_Sump_Pumps_Moisture_Articles_Box_Top_Left_ATF_300x250”); Ground water is collected by drain rock and drain tile buried along the foundation (and, in some cases, under the floor). Drain tile carries the water to the sump tank (or two sump tanks, in a large house) that is buried in the basement floor. The sump tank, also called a “basin,” “crock,” or “sump pit,” may be made of clay, tile, steel, concrete, fiberglass, or polyethylene. Though they vary in size, standard tanks are about 18 inches in diameter and 2 to 3 feet deep. Normally, a sump tank is located at the lowest point in the basement. Most tanks have a hole in each side for incoming drain tile and all have a sturdy cover. When ground water fills the tank to a given level, a Why we like it: • Pump turns on if water rises in basement • Includes
