What is a suitable mixer design for liquid detergents?
Q: I have a mixer tank with these dimensions: width 1.55m, height 2.5m. I want to use this mixer for liquid detergent industries where viscosity is between 1000-3000 cps at ambient temperature. What is the most suitable design for motor power, shaft, and impeller? A: Detergent applications may require different levels of mixing intensity depending on how the process is done. The following two options will provide moderately intense mixing or adequate mixing depending on the processing requirements. Both options, as described, use the same impeller system. For moderately intense mixing: a 2.2 kW motor, with a shaft speed of 68 rpm, and two (2) four-blade, 45-deg, pitched-blade impellers, 0.75 m in diameter with 0.15 m wide blades. For adequate, but less intense mixing: a 1.1 kW motor, with a shaft speed of 56 rpm, and two (2) four-blade, 45-deg, pitched-blade impellers, 0.75 m in diameter with 0.15 m wide blades. Both designs assume that the mixer will be center mounted in the tank and
