What is a good setting of the pulse parameters for tig welding equipment?
Before I ramble on about Tig Welding Equipment Pulse settings, if you dont want to read it, here are some good pulse settings I have found work on certain things. Welding near an edge on .125″ 308 stainless steel 50 pps 30% on time 30% background Weld build up on the edge of .050″ steel, stainless, or nickel alloy 30 pps 20 % on time 20 percent background Build up of threads on a 1 inch thick 4340 shaft 150 pps 50 % on time 50 % background There are other settings that would have worked too but I thought I might just list a few so that you would have some good places to start on certain jobs. Every tig welding machine is slightly different but the concepts are basically the same.There are 4 basic settings to understand: 1. Main Amperage – if you are using a foot pedal, you will vary the main amperage but remember this tip…You will need to set the main amperage at roughly twice the amperage you would select without pulse because with pulse, you get an average of the high and the low..
