What happens when QuantumCure™ has to be recoated?
Because QuantumCure™ is non-yellowing, it does not have to be completely stripped from the floor before reapplication. When the original QuantumCure™ sealant has become worn through use (typically 6-18+ months after application), it will be necessary to lightly sand the surface of the floor with a 200 mesh screen or abrasive pad, then remove all the particulates generated by vacuuming or dry mopping. After the floor is dry, a new layer of QuantumCure™ can be applied and cured as before.
Because QuantumCure™ is non-yellowing, it does not have to be completely stripped from the floor before reapplication. When the original QuantumCure™ sealant has become worn through use (typically 6-18+ months after application), it will be necessary to abrade the surface of the floor with a mesh screen or abrasive pad, then remove all the particulates generated by vacuuming or dry mopping. After the floor is dry, a new layer of QuantumCure™ can be applied and cured as before.
