What happens if the reservoir bottles go empty ?
This is not something you want to happen, obviously. But, if it does happen it is not necessarily catastrophic. First of all, when the bottles first appear to be empty, there is still ink in the cartridge that will prevent the printer from sucking in air. When the extra ink in the cartridges is gone, then the printer will continue to try to print without ink. This is not good. It can lead to damage to the printer if it continues for a long time. If you find the bottles are empty, and there is no ink in the lines, the CFS cartridges must be refilled, the same way they were when you first install the CFS. When reinstalled this should re-establish ink flow through the print head. If it doesn’t then the printer will need repair. It is very important to keep a watch over the ink reservoirs. If the ink level falls below the surface of the tray, it is time to add ink. There is enough ink in the reservoirs to be equivalent to 12 cartridge sets, so running out of ink is not something that will
