What do the different colors of the LED mean?
The LED is a status indicator – there to help you… This is a very helpful little function, because you could be battling for hours trying to figure out why you can’t get any communication with a controller on the bike, and in the meantime your comms line is shorted so there can’t be any comms… • Green : your GS-911 interface is powered up and all is good • Blue : Bluetooth of course – the LED will be blue when it is communicating over Bluetooth • Orange/Yellow : if you’re getting this while the Firmware is upgrading – don’t worry… that’s what its supposed to do! • Flashing Red : once you plug the device into the diagnostic plug on your motorcycle, and it flashes red, switch the ignition on and see whether it turns green – some controllers seem to take the K-line (comms line) low, when the ignition is off – if it turns green when you switch ignition on, don’t fuss… If it still flashed red with ignition on, you have a shorted K-line… typically a wiring problem, but could also b
