What do I get in a basic picthed roof kit?
• • Polycarbonate Diamond top dome • Condensation seal • ABS Flashing plate for slate pitched roof • ABS undercloak roofing felt support • 610mm connecting pipe with crimped end connecting piece Must be used at roof level (cut to length on site) • 3 section Adjustable elbow (for steeper roof slopes over 45° you will require 2 x 30° elbows) • Plain end SunPipe 610mm (580mm fitted) must be used to terminate above ceiling level • 3mm Plywood backing panel and marking out template • SunPipe Bell End slides over end of plain end pipe above ceiling level • Fixing ring to be fitted to ceiling opening • Ceiling diffuser clear stippled or opal • push on Diffuser trim in white as standard • 15 x 15mm self tapping stainless steel screws/washers • 5 x for fixing the collar to flashing plate • 4 x for fixing the pipe to the ABS collar • 5 x for fixing the dome to the ABS collar • 1 x spare • 13 x 45mm screws (depending on SunPipe size) • 5 x for fixing the ceiling diffuser • 8 x for fixing the flas
