What connector should be used to interface to the TC4?
The TC4 Module Connector is a 100-pin fine pitch polarized connector manufactured by Samtec, Inc www.samtec.com The socket is fitted to the TC4 and the header must be fitted to the Host board for proper mating. The connector part numbers are shown in the table 28 below. Part Number Type Description Samtec YFS-20-03-H-05-SB Socket Mounted on TC4 Samtec YFT-20-05-H-05-SB Header Recommended for Host (to mate with TC4 with a board-to-board spacing of 5.0 mm) Samtec YFW-20-07-H-05-SB Header Alternative for Host (to mate with TC4 with a board-to-board spacing of 7.0 mm) Samtec YFW-20-09-H-05-SB Header Alternative for Host (to mate with TC4 with a board-to-board spacing of 9.0 mm) Samtec YFW-20-12-H-05-SB Header Alternative for Host (to mate with TC4 with a board-to-board spacing of 12.0 mm) Samtec YFW-20-19-H-05-SB Header Alternative for Host (to mate with TC4 with a board-to-board spacing of 19.0 mm) Samtec YFW-20-25-H-05-SB Header Alternative for Host (to mate with TC4 with a board-to-boar
Related Questions
- When using a default interface, are the WSDL and XSD files used by the SSE during the service execution or just for the workflow generation/compilation?
- How can I contact someone to discuss how Garmin’s Fleet Management Interface can be used within the context of my dispatch system?
- What type of connector needs to be used to interface an antenna to the transverter of an AU-E or a SU-E?
