What clearance is needed around the EBM? Where are the access points and can it be positioned flush against the wall?
If the side of the EBM with the printers is considered to be the south side then the north and west sides can be positioned flush against the wall with an alcove at the northwest corner. The trim receptacle tray needs to be able to pull out on the east side and for that a 3.5 foot clearance is needed. On the printer side, the paper trays open to the left and therefore do not add any depth but a foot clearance is needed in front of the printers to move along the length of the EBM, from the monitor to the book output shoot. A panel on the south side opens outwards but does not add any depth. The main access panel at the top of the EBM opens upwards at a 45 degree angle. Occasionally there may be a need to access the mechanical components on the west side of the EBM so the 3.5 feet clearance on the east side should allow for the EBM to be moved sideways.
