WHAT CAUSES HIGH HYDROCARBON (HC)?
Below are common failures which are likely to produce high Hydrocarbon HC. Hydrocarbons are basically raw fuel, otherwise known as Gasoline. High Hydrocarbon (HC) emissions are almost always a sign of poor fuel ignition. However, it’s not always that the engine’s ignition system is responsible for high Hydrocarbon emissions. Read on. 1. Improper Ignition Timing – Engine ignition timing is measured in degrees before or after Top Dead Center (TDC). Example of an ignition timing failure would be in the case where an engine’s ignition timing is required to be set at 10 degrees Before Top Dead Center (BTDC) and instead is set to 15 degrees BTDC. This fault will not only cause a smog check “functional failure”, but will increase Hyrdocarbon (HC) emissions as well. California allows 3 degrees +/- off of the manufacturer’s required setting. Note: Late model vehicle’s may not have a distributor, and therefore no timing adjustment will be needed. On these engines timing is electronically control
