What can I do when my Sky Digibox says No Signal or Technical fault?
How to Reset a Sky Digibox when ‘No Signal’ appears. Reset method 1 – Delete and Rescan • Turn the power off at the mains socket. Either do this by pulling the plug from the socket, or using a power switch if there is one. • Remove the viewing card from the machine. Using a dry cloth or kitchen roll, clean the gold connector on the reverse of the card. Do not use any cleaning products. • Check cables and connectors are in good order. • Wait for at least 30 seconds. • With the card still out of the machine, plug the Digibox back into the mains. • Ignore all the messages, and wait for around a minute. • Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1. • Insert viewing card, wait a few seconds. • Check 104 for Channel 4 and 105 for five. Reset Method 2 – Reset the LNB If the above method does not work, the LNB may have a fault. • Press the [SERVICES] button and then press [4] [0] [1] then [SELECT] On Sky HD, press the [SERVICES] button and then press [0] [0] [1] then [SELECT] Press
