What can be done if the Ionic Breeze starts to make noise?
• Unplug the unit and remove the collection grid. • Invert, rotate and shake the unit for several minutes. This aggressive action will cause the internal cleaning beads to scrape the ionizing wires inside the unit. Noise can be caused by particles clinging to the wires and the cleaning beads are designed to get rid of these small particles. • The above procedure may require several attempts. • With the grid removed, up-end the unit and shake out collected dust from the base. Plug the unit back in and listen. If the noise persists: • Unplug the unit and remove the grid. • Remove the back cover to expose the germicidal lamp area. (GP model only.) • Use compressed/canned air to blow away debris and dust from the wire and any visible parts inside the unit. (A hand-held hair dryer can also be used.) Reassemble the unit and test again. If the noise persists, cautiously try the following: • Unplug the unit and remove the collection grid. • Use a cotton swab taped to a stick, cardboard from a
