What cables are used with the ProCurve Switch 2224?
All of the twisted-pair ports are wired as MDI-X. Therefore, to connect end nodes, servers, or other MDI-type devices to these ports, use “straight-through” twisted-pair cables. To connect to hubs, switches, or other MDI-X type devices, use “crossover” twisted-pair cables. For connections to the 10 Mbps ports, you can use Category 3, 4 or 5 unshielded twisted-pair cable, as supported by the IEEE 802.3 Type 10Base-T standard. For connections to the 100 Mbps ports, use Category 5 only, as defined by the IEEE 802.3u Type 100Base-TX standard. Only twisted-pair cables with solid conductors are supported to the full 100 meters; do not use braided or drop cables.
