What are the recommended steps for jump start using MICHELIN Smart cables?
Four (4) vehicle preparation steps: 1. Position vehicles so they are not touching but close enough for cable use. 2. Set an auto transmission vehicle in “Park” position; Set a manual transmission vehicle in “Neutral.” 3. Turn the ignition “Off” of both vehicles and set both parking brakes. 4. Raise and secure both hoods. Four (4) easy boosting steps: 1. To the vehicle supplying assistance: connect one clamp to the positive (red) and the other clamp to the negative (black) battery terminal. 2. To the disabled vehicle: connect one clamp to the positive (red) terminal and the other clamp to exposed metal on the engine block or vehicle frame. 3. Verify both green LED’s are lit on the jumper’s center module. If not, adjust the clamps until they do light up. 4. Start the vehicle supplying assistance and let it idle normally for about 30 seconds. Then start the disabled vehicle. Once the disabled vehicle is running, disconnect the clamp attached to the engine block/vehicle frame first, and th
