What are the recommended figures for maximum noise level measured by the receiver?
It is recommended to have a noise level below 40. Noise level measurement above 40 indicates a high noise level in the receiver’s environment, which may interfere with normal operation. Usually, changing the installation position by few meters can resolve this problem. What ensures that the same detector will not be learned twice by the panel in different zones? Each detector has a factory address, one of 16 million random addresses. When a detector is allocated in the panel, its address is registered and can not be used in another zone. What is the battery life of the detectors? In normal conditions, the detector’s battery life can extend up to 5 years. However, these figures may vary, based on the day to day routine in the detector environment and how frequently it is activated. It should also be noted; that the 5 years life cycle is applicable when normal mode is selected, using the 2.5minute dead time between movement signaling. When full signaling is set, meaning with no dead-time
