What are the outputs of a DVD player?
Most DVD players have the following output connections: Video: – Composite video (CVBS) RCA/Cinch (NTSC or PAL) – Y/C (s-video) (NTSC or PAL) Audio: – Dual RCA stereo analog audio (with Dolby Surround encoding) – Digital audio (IEC-958 Type II RCA coax (S/P DIF) or EIAJ CP-340 optical (Toslink)). Raw digital audio (AC-3, MPEG-2, PCM, or optional DTS or SDDS) requires an external decoder or an amplifier/receiver with built-in decoder. (Note: The digital AC-3 audio output is not the same as the RF AC-3 output on laserdisc players.) Some players may have additional connections: – Component analog video, NTSC or PAL (YUV: 3 RCA connectors, RGB: SCART connector or 3 RCA) – RF video output for connecting via channel 3 or 4 to TV without direct input. (Panasonic DVD-A300, RCA 5500P) – 6 RCA jacks for analog surround sound output. (Panasonic DVD-A300, RCA 5500P, Samsung DVD905) – AC-3 RF output on combo LD/DVD players. LD AC-3 on RF output only, DVD AC-3 on coax/optical outputs only. (Pioneer
Most DVD players have the following output connections: Video: – Composite video (CVBS) RCA (NTSC or PAL) – Y/C (s-video) (NTSC or PAL) Audio: – Dual RCA stereo analog audio (with Dolby Surround encoding) – Digital audio (IEC-958 Type II RCA coax [S/P DIF] or EIAJ CP-340 optical [Toslink]). Raw digital audio (AC-3, MPEG-2, PCM, or optional DTS or SDDS) requires an external decoder or an amplifier/receiver with built-in decoder. (Note: The digital AC-3 audio output is not the same as the RF AC-3 output on laserdisc players.) Some players may have additional connections: – Component interlaced analog video, NTSC or PAL (YUV: 3 RCA connectors, RGB: SCART connector or 3 RCA). – Component progressive analog video, NTSC or PAL (YUV, 3 connectors). (Toshiba SD7108) – RF video output for connecting via channel 3 or 4 to TV without direct input. (Panasonic DVD-A300, RCA 5500P) – 6 RCA jacks for analog surround sound output. (Panasonic DVD-A300, RCA 5500P, Samsung DVD905) – AC-3 RF output on com
Most DVD players will have the following output connections: Video: – Composite video (CVBS) RCA/Cinch (NTSC or PAL) – Y/C (s-video) (NTSC or PAL) Audio: – Dual RCA stereo analog audio (with Dolby Surround encoding) – Digital audio (IEC-958 II RCA coax (S/P DIF) or EIAJ CP-340 optical (Toslink)). Raw digital audio (AC-3, MPEG-2, PCM, or optional DTS or SDDS) requires an external decoder or an amplifier/receiver with built-in decoder. (Note: The digital AC-3 audio output is not the same as the RF AC-3 output on laserdisc players.) Some players may have additional connections: – Component analog video, NTSC or PAL (YUV: 3 RCA connectors, RGB: SCART connector or 3 RCA) – RF video output for connecting via channel 3 or 4 to TV without direct input. (Panasonic DVD-A300, RCA 5500P) – 6 RCA jacks for analog surround sound output. (Panasonic DVD-A300, RCA 5500P) – AC-3 RF output on combo LD/DVD players. LD AC-3 on RF output only, DVD AC-3 on coax/optical outputs only. (Pioneer DVL-90, DV-50/DV
Most DVD players will have the following output connections: Video: – Composite video (CVBS) RCA/Cinch (NTSC or PAL) – Y/C (s-video) (NTSC or PAL) Audio: – Dual RCA stereo analog audio (with Dolby Surround encoding) – Digital audio (IEC-958 Type II RCA coax (S/P DIF) or EIAJ CP-340 optical (Toslink)). Raw digital audio (AC-3, MPEG-2, PCM, or optional DTS or SDDS) requires an external decoder or an amplifier/receiver with built-in decoder. (Note: The digital AC-3 audio output is not the same as the RF AC-3 output on laserdisc players.) Some players may have additional connections: – Component analog video, NTSC or PAL (YUV: 3 RCA connectors, RGB: SCART connector or 3 RCA) – RF video output for connecting via channel 3 or 4 to TV without direct input. (Panasonic DVD-A300, RCA 5500P) – 6 RCA jacks for analog surround sound output. (Panasonic DVD-A300, RCA 5500P) – AC-3 RF output on combo LD/DVD players. LD AC-3 on RF output only, DVD AC-3 on coax/optical outputs only. (Pioneer DVL-90, DVL
