What are the network requirements for an extended RAC cluster?
Necessary ConnectionsInterconnect, SAN, and IP Networking need to be kept on separate channels, each with required redundancy. Redundant connections must not share the same Dark Fiber (if used), switch, path, or even building entrances. Keep in mind that cables can be cut.The SAN and Interconnect connections need to be on dedicated point-to-point connections. No WAN or Shared connection allowed. Traditional cables are limited to about 10 km if you are to avoid using repeaters. Dark Fiber networks allow the communication to occur without repeaters. Since latency is limited, Dark Fiber networks allow for a greater distance in separation between the nodes. The disadvantage of Dark Fiber networks are they can cost hundreds of thousands of dollars, so generally they are only an option if they already exist between the two sites.If direct connections are used (for short distances) this is generally done by just stringing long cables from a switch. If a DWDM or CWDM is used then then these ar
