What are the major differences between model and high power rockets, besides size and engines? Are they built differently?
Above and beyond all else, high power rockets are built much stronger than standard model rockets. This is due to the higher speeds and acceleration achieved by these models. Some of the construction differences are: – High power rockets have stronger, thicker body tubes – They have MUCH stronger engine mounts, bonded using epoxy rather than white or yellow glue – Engine mount rings, adapter rings, etc., are typically made from 1/8″ or thicker aircraft plywood, fiberglass, or phenolic sheet, rather than paper or balsa. – Fins are typically made from plywood, fiberglass, phenolic, or waferglass, not balsa; Thick balsa fins have been used on H/I powered models, but they have to be reinforced with fiberglass/epoxy laminate. – Fins are often mounted into slots in the body tube with Through The Wall (TTW) mounting. Most common and recommended method is glued TTW and directly onto the motor tube. – Parachutes are larger and typically made from some type of fabric (plastic chutes are not stro
