What are the DIP switches on my Grappler+ for?
The DIP switches are used to configure your card for a series of different printers out there. I’ll list those settings: DIP switch settings: ~~~~~~~~~~~~~~~~~~~ DIP SWITCH POSITIONS 1 2 3 4 Epson Series and Star Gemini OFF ON ON ON NEC 8023/C, Itoh 8510/DMP 85 OFF ON ON OFF Centronics 739-1 OFF ON OFF ON Anadex Printers OFF ON OFF OFF Okidata 82A, 83A, 92, 93, 84 OFF OFF ON ON Okidata 84 w/o Step II Graphics OFF OFF OFF ON Apple Dot Matrix OFF OFF ON OFF IDS Printers (Any position) Notes: DIP switch ON = “+” side or set to right. Switch 1 controls MSB, the 8th bit. Setting switch 1 to ‘ON’ makes MSB _not_ transmitted… —————————- From: Joe Kohn The Harmonie printer drivers are available from Shareware Solutions II. As the publisher, the most frequently asked question I get is “Which Grappler+ dip switch setting should I use for an HP DeskJet?” According to those who use a Grappler+ to connect a DeskJet, the dip switch settings are: 1-ON (up) 2-OFF (down) 3-OFF (down
