What are the available transmit power level settings for a 1200 AP?
A. The transmit power settings are different and depend on the radio that is used. Refer to Cisco Aironet 1200 Series Access Point Data Sheet for the complete list of power setting levels. Because the power settings vary on the basis of the channel, perform a site survey. The site survey is important in order to get accurate information on the setting to use. Refer to Wireless Site Survey FAQ for details on site surveys. Q. How can I set the AP so that only IEEE 802.11g clients can connect? I do not want the IEEE 802.11b clients to connect and slow down the wireless network. There is a second, parallel 802.11b network for unsecured clients. A. In order for the AP to receive only 802.11g clients, complete these steps in the GUI: • Go to the Network Interfaces section and click Radio 0-802.11G. • Click the Settings tab at the top of the Radio 0-802.11G window. • Choose Disable for these data rates: • 1.0 • 2.0 • 5.5 • 11.0 • Choose Require for all the other data rates. These are the othe
