What are some of the things that can be done to fix barrel wobble?
As you do each of these please take the time to see if the change has made a difference. If the barrel wobble is fixed with simply tightening the screws, then don’t go overboard and try to torque down every screw and nut on the AEG. It will only cause you pain and suffering in the long run. – Tighten the set screws on the barrel: there are screws on the outer barrel assembly which will need to be tightened as barrel wobble appears. Be careful with this, the metal that the stock outer barrel is made of is typically a very soft metal. If you try to torque down screws that are SNUG already you run the risk of stripping the outer barrel assembly and if you thought the barrel was wobbly before, you haven’t seen anything yet. So, be careful. Don’t over tighten these screws. There are also some front ends that have screws that go all the way through to the inner barrel. Each make and model differ so MAKE sure that you know what the screw is going to do. If you tighten one of these screws you
