What are some good plastic suppliers sites?
Ridout Plastics San Diego Plastics (hurts my eyes) US Plastic Modern Plastics TAP Delvie’s But always check your local area for the best deals first. Q: How do I glue acrylic pieces together? A: IPS Weld-on #3 or #4 are suitable adhesives available from your plastics supplier. You can use other products, but these are specially formulated. Use #3 if you’re working with Lexan. Use #4 if you’re working with Acrylic. #3 may make your seams appear cloudy if applied in humid conditions. The adhesive is the consistency of water. Use a needle applicator available from your supplier to apply the adhesive. Edges to be glued should not be polished. Use corner clamps to hold the joint together under mild pressure. Apply the cement to the inside of the joint, keeping the joint horizontal. The adhesive will flow into the joint by capillary action. The bond will set in about an hour, but allow eight hours or more for the adhesive to fully cure before removing the clamps. Q: Can I form/bend Acrylic s
