What are important tips about grouting with LATICRETE SpectraLOCK PRO Grout?
• Cut excess grout off the face of tile with a grout float. Don’t leave large globs of LATICRETE SpectraLOCK PRO Grout on the face of the tile. Remove it prior to cleaning. • Mix the cleaning additive provided with clean water. • The working time of LATICRETE SpectraLOCK PRO Grout is approximately 80 minutes at 70° F (21°C); don’t mix more than you can grout in that time frame. • LATICRETE SpectraLOCK PRO Grout residue can be easily removed with a sponge and water. Wait 20 to 30 minutes before cleaning (or within one hour of mixing the product). Wait longer at colder temperatures. Add “Initial Wash” cleaning additive to two gallons of clean water and mix until fully dissolved. Submerge clean sponge into water and wring until damp. • Change sponges and water with cleaning additive every 50 ft2 when using multiple units. • LATICRETE SpectraLOCK PRO Grout utilizes a non-pigmented filler powder that will not stain any tile, such as quarry tile, polished porcelain, marble and other unglazed
Related Questions
- When should I use LATICRETE® SpectraLOCK® 2000 IG in lieu of LATICRETE SpectraLOCK PRO Premium Grout or LATICRETE SpectraLOCK PRO Grout?
- Can I use LATICRETE SpectraLOCK PRO Premium Grout or LATICRETE SpectraLOCK PRO Grout to grout marble?
- What are important tips about grouting with LATICRETE SpectraLOCK PRO Grout?
