What aftermarket shifters are available?
See question 7.10. 3.19 What aftermarket transmission mounts are available? For TH350 and similar: Energy Suspension part number 3-1108G, black (graphite) (actually a universal trans mount with 3 mounting holes) Torque arm mounts: Energy suspension part numbers 3137 (outer) and 7033 (inner). 3.20 What aftermarket clutches are available? So far just some advice from Kevin (SoloII_74): “A three finger or borg&beck will have way too much pressure to be used with the factory clutch cable. You will distort the firewall where the cable passes through, as well as having other problems related to the overall geometry. You need to stick with a mild diaphram pressure plate, or switch to a hydraulic throwout bearing.” And some more from Clyde (CJBIAGI): “I agree with Kevin, you need to stick with a diaphram type pressure plate. I used a complete Hayes setup, 30lb steel flywheel and 10 1/2” street clutch, this is the same clutch assembly that would be used on a heavier Camaro or Chevelle and is mo
Related Questions
- I heard that some other aftermarket rear sway bars will not fit 1999 M3s due to production changes. Are there issues with the SwayBarbarian?
- Does an aftermarket replacement or modified tailpipe or muffler tip constitute a violation of section 27151 VC?
- What company makes the loudest aftermarket exhaust pipes for the harley davidson street glide
