We haven even talked about the variations in different guns regarding the length of chamber, size of feed ramp/case head support, and diameter of chambers. Need we go on?
This is why handloading is a way to maximize performance for your gun, with your lot of components, and why McNett’s published figures here are academic ONLY -> Showing us what HE got with HIS components in HIS barrels! I’ve bettered some of the loads of some people here, but, on the other hand, I can’t come up to some of the loads some people post here. MY barrels and components are better in some combinations and worse in others. It’s important, that if you choose to handload for performance gains like these, you know how to read pressure and thoroughly understand reloading safety procedures. I hope this explains why loads such as these aren’t generally available and why we discuss them so much. I also hope this explains why you shouldn’t EXPECT to get the exact same performance. Like I said, in some examples I’ve done better, and in some I haven’t been able to match them. The point is, getting more than factory, but SAFELY! [MakeMineA10mm] Back To Top Determining Comparative Pressur
Related Questions
- We haven even talked about the variations in different guns regarding the length of chamber, size of feed ramp/case head support, and diameter of chambers. Need we go on?
- What measures are taken in case the length of audio file mentioned while uploads is different from the actual length?
- In Eurocode 2, is the lap length based on the size of the smaller bar as is the case to BS8110?
