Unlock the print carriage and move it over to left to reveal the pump/capping station assembly. (How do I unlock the print carriage?
• Locate the capping station area. (Diagram and Instructions) • Spray and saturate the capping station with Simple Green. • Remove the Flushing Box, by removing its screw and lifting it straight up and out. (Use a magnetic screwdriver to avoid dropping the screw into the printer.) • Rinse the flushing box with HOT water until the water runs fairly clear. You can also use a lint-free cloth to clean any ink, cotton fibers, or foreign material. • Locate the wiper blade back between the capping station and flushing box and clean thoroughly, using a foam-tipped swap or a lint-free cloth. Clean between the split of the two rubber squeegees. • Return the flushing box by reattaching the removed screw. • Push the carriage assembly back to the parked position and allow the print carriage to sit on the capping station for at least 20 minutes. (overnight, if possible.
Related Questions
- When I take print outs of the converted document, the text gets truncated from the left and right margins. How can I make sure this does not happen?
- Unlock the print carriage and move it over to left to reveal the pump/capping station assembly. (How do I unlock the print carriage?
- How is the DC fuel pump in the left tank activated?
