There is no response or it need a little time to response though I push the stick to the top as instructed in the software when calibrating the PITCH channel. Why?
If users use an electric helicopter, maybe the throttle curve is stretched level. Since the throttle and the pitch are controlled by a same stick, user is calibrating throttle channel at the same time calibrating the pitch channel . But if the throttle curve is level, the software could not read the change value of the throttle, so the calibration is not complete. So when user calibrates the pitch, he must set the last point of the throttle curve to the 100% position. Then user could set the throttle curve as usual after finishing the calibration as mentioned. 14.Q: Do I need to calibrate the channel every time I reset the curve of the channel？ A: If you change the setting of the channel’s curve, you need to recalibrate; if you change the curve’s end point or its travel adjustment , you must recalibrate the channel. Otherwise you don’t need to.
