The WAIS program will not detect the Davis Weather Monitor II(WMII). What can I do?
Ensure that— 1. No other program that accesses the WMII is running . . . for example, the Davis Weather Link** software. Just to be sure, reboot the computer, then run WAIS and click on each COM port selection and see if the weather station responds. ** You cannot run Weather Link and WAIS at the same time. Both of these programs try to get data from the weather station. They cannot both talk to the station at the same time. It will cause unreliable data and other problems. Please turn off the Davis Weather Link software prior to using WAIS. 2. You have the right version of WAIS. Go to the “Options” tab (in WAIS Version 2.x) or the “Status” tab (in WAIS Version 3.x) and look at the “Wx Type”. It should say WMII for the Davis weather station. 3. WAIS communicates with the WMII at a baud rate of 2400 baud. Be sure that the WMII is set to communicate at this speed. You can do this by running the Davis Weather Link software and setting the communications speed from there. Be sure to comp
Related Questions
- I am running WAIS and the barometric readout on WAIS and WAMON is 3 inches lower than the readout on the Davis Weather Monitor II- Why aren the readings the same?
- The WAIS program will not detect the Davis Weather Monitor II(WMII). What can I do?
- Why can’t I run the Davis Weather Link software and WAIS at the same time?
