The Solar Stik™ is too tall. Can it be shortened?
The Solar Stik™ Mast-top mount was designed to hold an accessory item, but if it isn’t needed, it may be cut off and this will shorten the Mast by 5 inches. For example, this may be necessary if the Solar Stik™ is being stored in the lower bay of an RV. Most RV bays are 7 feet across and the Solar Stik™ measures 7’3″ with the top-mount in place. The Solar Stik™ may also be shortened from the bottom, but it is recommended that the removal of the Mast base NOT exceed 3 inches. This modification should only be done by a qualified metalworker. In cases where the Height Adapter kit was installed, The 24″ extension may be cut to help achieve the correct solar panel operating height. For example, if an additional 10 inches is required to achieve correct operating height, then 14 inches of the Height Adapter extension may be removed.
