The FWSM has a label that states, “Do not remove card while status light is green or disk corruption may occur.” What does this mean?
A. The firewall module should be removed only after you disable power using one of these methods. (There is no preference for a particular method.) • Use the command-line interface (CLI) of the switch and issue one of these commands. • CatOS – set module power down mod • Cisco IOS® Software – no power enable module slot • Press the shutdown button on the blade. • Physically power down the chassis. You can remove the module safely when the status light is longer green.
A. The firewall module should be removed only after you disable power using one of these methods. (There is no preference for a particular method.) • Use the command-line interface (CLI) of the switch and issue one of these commands. • CatOS – set module power down mod • Cisco IOS?Software – [url=file:///C:/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00801eaeca.html#16684]no power enable module slot [/url] • Press the shutdown button on the blade. • Physically power down the chassis. You can remove the module safely when the status light is longer green.
