The crew put a hose into the pool and started filling it with waternow what?
Filling the swimming pool When the application of plaster or Diamond Brite, RiverRok and Durazzo has been completed, the crew will begin filling the pool with water. Note that the application of Diamond Brite, RiverRok or Durazzo is a two-day process. The average pool takes 24 to 36 hours to fill. Until the pool is completely filled with water it is vulnerable and extra care should be taken as detailed below. It is important that your swimming pool be filled with water as soon as possible. Do not turn the water off for any reason until the pool is full. If you have a spa, it should be filled with water after the pool has been filled completely. If the water is shut off prematurely, you may have a bath tub ring around your pool. Monitor your pool as it is filling so that you can predict at about what time the water should be turned off. It may be necessary to set your alarm. Watch it closely! Use the pool fill line only after the initial water fill process is complete. Additional hoses
Related Questions
- I just registered by filling out the "Initial Registration Form for the HBS Subject Pool" but I still can log onto the Current Studies page. Why?
- Where do I get a licensed engineer / architect to look at my pool to get the process started?
- The crew put a hose into the pool and started filling it with waternow what?
