Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

The built in GPS doesn work on Viliv S5?

April 26, 2017built GPS S5

0

Posted

The built in GPS doesn work on Viliv S5?

1 Answer

0

Posted

The Viliv S5’s built in GPS will be automatically detected and used by StreetDeck if the GPS source is set to “Not Set” in navigation settings. It may take several minutes to obtain a GPS lock the first time the GPS is used in a new location. If the GPS doesn’t work, please make sure the GPS has a clear view of the sky and the GPS source is set to “Not Set”. The GPS satellite status can be seen by clicking on the satellite signal strength in the lower right hand corner of the fullscreen navigation module. Check out this video for more information. NOTE: The Viliv GPS runs on COM port 1 at 9600 baud. By default StreetDeck will connect only at 4800 baud if the COM port is manually selected. If the GPS is autodetected, the proper baud rate will be automatically used. To manually set a baud rate, use the command line parameter GPSBaud followed by the baud rate. i.e.