Softener & Filter System, What is the proper way to install them?
First let me start by explaining the sequence of the components starting from the water source. Max adapter, tubing, shut off valve, tubing, softener housing, tubing, carbon filter housing, tubing, shut off valve, purge filters, and connect to machine. That was the short simplified version now I will get into a little more detail. To install the max adapter, go under your sink and shut the cold water off. Directly behind the shut off valve you just closed is a 3/8-inch compression fitting, undo it. Attach the max adapter to where you just disconnected the water line that goes up to your cold-water faucet. Note: You may need to go to Home Depot to complete the next step. Now connect the tubing that comes down from your faucet to the top of the max adapter. It will require some bending if you have ridged 3/8 pipe. If you can’t get it to line up by bending then disconnect it up above at the faucet and go to home depot, they sell several different lengths of flex braided tubing complete wi
