scope and requirements for tiedown and restraint products in order to comply with the wheelchair tiedown and occupant restraint standards? (WTORS)– SAE J2249 and ISO 10542
The standards apply to: both passengers and drivers (adults only-ISO), both public and private vehicles all wheelchairs including scooters forward facing wheelchairs in the vehicle crashes involving frontal impact of the vehicle only (side and rear future work). The standards require that: pelvic and shoulder restraints be used in the tests (and recommends use of both belts during transport, especially in vehicles that have occupant restraint belts normally installed) a dynamic 30 mph (48kph)test be used to confirm the performance of the WTORS the end fittings on tiedown straps have a specific design so that the end fitting will readily latch to the mating receptacle on the transport-tested wheelchair the product be permanently labeled as to the test passed, and user warnings, installation and usage instructions be provided.
Related Questions
- What are the requirements for tiedown and occupant restraint products to comply with the wheelchair tiedown and occupant restraint standards (WTORS: SAE J2249 and ISO 10542)?
- scope and requirements for tiedown and restraint products in order to comply with the wheelchair tiedown and occupant restraint standards? (WTORS)-- SAE J2249 and ISO 10542
- What is the specific scope and requirements for wheelchair products in order to comply with the transport wheelchair standards?
