Remove the overcap and spray – Right?
Ans. For best results, always shake an aerosol can for at least 1 minute until the internal agitator ball rattles. If the agitator ball isnt moving freely, turn the can upside down and tap the bottom of the aerosol can with the palm of your hand or rubber heel of your shoe to free the ball agitator. Then hold the can at the top and rotate bottom of can in a small circle for at least 2 minutes. Repeat shaking for 10 sec. after 1 minute of spraying to maintain color uniformity. Its possible to change the color and gloss of the paint by not shaking properly.
For best results, always shake an aerosol can for at least 1 minute until the internal agitator ball rattles. If the agitator ball isnt moving freely, turn the can upside down and tap the bottom of the aerosol can with the palm of your hand or rubber heel of your shoe to free the ball agitator. Then hold the can at the top and rotate bottom of can in a small circle for at least 2 minutes. Repeat shaking for 10 sec. after 1 minute of spraying to maintain color uniformity. Its possible to change the color and gloss of the paint by not shaking properly. Aerosol Paint manufacturing is a complex technology. During the development of various type of paints in aerosol form, the alteration in the formulations have to be made for different surface application viz metal ,wood, ABS plastics, Polypropylene ,careful selection of solvents and its balance, compatibility with Valve gasket and proper aperture to eliminate leakages and clogging of valve and so on….
