PeaceMaker doesn seem to silence my siren. Whats wrong?
Follow the PeaceMaker Test Procedure described above to test your PeaceMaker. If it does not properly silence the siren, check for the following: Is the Honking Switch properly set? If your car alarm honks the car horn when it is triggered or if your alarm’s 8-ohm speaker siren “plays” a variety of tone patterns when triggered and some of these tone patterns have brief silent periods, the Honking Switch should be up (turned on). This switch should be down (turned off) for all other types of sirens, bells, and buzzers. More information on the Honking Switch is provided in the Detailed Setup Instructions. Does your alarm system use an 8-ohm speaker siren? Speaker sirens have driver circuits built into the alarm module rather than the siren. The siren simply acts as a speaker. If the polarity of the wires running from your alarm module to PeaceMaker is reversed, PeaceMaker’s ALARM indicator may still light up during siren soundings, but it will never properly silence the siren. Try revers
